Genomic analysis of feed efficiency traits in beef cattle using random regression models.

Feed efficiency plays a major role in the overall profitability and sustainability of the beef cattle industry, as it is directly related to the reduction of the animal demand for input and methane emissions. Traditionally, the average daily feed intake and weight gain are used to calculate feed efficiency traits. However, feed efficiency traits can be analysed longitudinally using random regression models (RRMs), which allow fitting random genetic and environmental effects over time by considering the covariance pattern between the daily records. Therefore, the objectives of this study were to: (1) propose genomic evaluations for dry matter intake (DMI), body weight gain (BWG), residual feed intake (RFI) and residual weight gain (RWG) data collected during an 84-day feedlot test period via RRMs; (2) compare the goodness-of-fit of RRM using Legendre polynomials (LP) and B-spline functions; (3) evaluate the genetic parameters behaviour for feed efficiency traits and their implication for new selection strategies. The datasets were provided by the EMBRAPA-GENEPLUS beef cattle breeding program and included 2920 records for DMI, 2696 records for BWG and 4675 genotyped animals. Genetic parameters and genomic breeding values (GEBVs) were estimated by RRMs under ssGBLUP for Nellore cattle using orthogonal LPs and B-spline. Models were compared based on the deviance information criterion (DIC). The ranking of the average GEBV of each test week and the overall GEBV average were compared by the percentage of individuals in common and the Spearman correlation coefficient (top 1%, 5%, 10% and 100%). The highest goodness-of-fit was obtained with linear B-Spline function considering heterogeneous residual variance. The heritability estimates across the test period for DMI, BWG, RFI and RWG ranged from 0.06 to 0.21, 0.11 to 0.30, 0.03 to 0.26 and 0.07 to 0.27, respectively. DMI and RFI presented within-trait genetic correlations ranging from low to high magnitude across different performance test-day. In contrast, BWG and RWG presented negative genetic correlations between the first 3 weeks and the other days of performance tests. DMI and RFI presented a high-ranking similarity between the GEBV average of week eight and the overall GEBV average, with Spearman correlations and percentages of individuals selected in common ranging from 0.95 to 1.00 and 93 to 100, respectively. Week 11 presented the highest Spearman correlations (ranging from 0.94 to 0.98) and percentages of individuals selected in common (ranging from 85 to 94) of BWG and RWG with the average GEBV of the entire period of the test. In conclusion, the RRM using linear B-splines is a feasible alternative for the genomic evaluation of feed efficiency. Heritability estimates of DMI, RFI, BWG and RWG indicate enough additive genetic variance to achieve a moderate response to selection. A new selection strategy can be adopted by reducing the performance test to 56 days for DMI and RFI selection and 77 days for BWG and RWG selection.

Investigating the impact of non-additive genetic effects in the estimation of variance components and genomic predictions for heat tolerance and performance traits in crossbred and purebred pig populations.

BACKGROUND: Non-additive genetic effects are often ignored in livestock genetic evaluations. However, fitting them in the models could improve the accuracy of genomic breeding values. Furthermore, non-additive genetic effects contribute to heterosis, which could be optimized through mating designs. Traits related to fitness and adaptation, such as heat tolerance, tend to be more influenced by non-additive genetic effects. In this context, the primary objectives of this study were to estimate variance components and assess the predictive performance of genomic prediction of breeding values based on alternative models and two independent datasets, including performance records from a purebred pig population and heat tolerance indicators recorded in crossbred lactating sows. RESULTS: Including non-additive genetic effects when modelling performance traits in purebred pigs had no effect on the residual variance estimates for most of the traits, but lower additive genetic variances were observed, especially when additive-by-additive epistasis was included in the models. Furthermore, including non-additive genetic effects did not improve the prediction accuracy of genomic breeding values, but there was animal re-ranking across the models. For the heat tolerance indicators recorded in a crossbred population, most traits had small non-additive genetic variance with large standard error estimates. Nevertheless, panting score and hair density presented substantial additive-by-additive epistatic variance. Panting score had an epistatic variance estimate of 0.1379, which accounted for 82.22% of the total genetic variance. For hair density, the epistatic variance estimates ranged from 0.1745 to 0.1845, which represent 64.95-69.59% of the total genetic variance. CONCLUSIONS: Including non-additive genetic effects in the models did not improve the accuracy of genomic breeding values for performance traits in purebred pigs, but there was substantial re-ranking of selection candidates depending on the model fitted. Except for panting score and hair density, low non-additive genetic variance estimates were observed for heat tolerance indicators in crossbred pigs.

NASA POWER satellite meteorological system is a good tool for obtaining estimates of the temperature-humidity index under Brazilian conditions compared to INMET weather stations data.

Heat stress negatively affects livestock, with undesirable effects on animals' production and reproduction. Temperature and humidity index (THI) is a climatic variable used worldwide to study the effect of heat stress on farm animals. Temperature and humidity data can be obtained in Brazil through the National Institute of Meteorology (INMET), but complete data may not be available due to temporary failures on weather stations. An alternative to obtaining meteorological data is the National Aeronautics and Space Administration Prediction of Worldwide Energy Resources (NASA POWER) satellite-based weather system. We aimed to compare THI estimates obtained from INMET weather stations and NASA POWER meteorological information sources using Pearson correlation and linear regression. After quality check, data from 489 INMET weather stations were used. The hourly, average daily and maximum daily THI were evaluated. We found greater correlations and better regression evaluation metrics when average daily THI values were considered, followed by maximum daily THI, and hourly THI. NASA POWER satellite-based weather system is a suitable tool for obtaining the average and maximum THI values using information collected from Brazil, showing high correlations with THI estimates from INMET and good regression evaluation metrics, and can assist studies that aim to analyze the impact of heat stress on livestock production in Brazil, providing additional data to complement the existing information available in the INMET database.

Genomic prediction in Brazilian Guzerá cattle: application of a single-step approach to productive and reproductive traits.

This study aimed to investigate the feasibility of genomic prediction for productive and reproductive traits in Guzerá cattle using single-step genomic best linear unbiased prediction (ssGBLUP). Evaluations included the 305-day cumulative yields (first lactation, in kg) of milk, lactose, protein, fat, and total solids; adjusted body weight (kg) at the ages of 450, 365, and 210 days; and age at first calving (in days), from a database containing 197,283 measurements from Guzerá males and females born between 1954 and 2018. The pedigree included 433,823 animals spanning up to 14 overlapping generations. A total of 1618 animals were genotyped. The analyses were performed using ssGBLUP and traditional BLUP methods. Predictive ability and bias were accessed using cross-validation: predictive ability was similar between the methods and ranged from 0.27 to 0.47 for the genomic-based model and from 0.30 to 0.45 for the pedigree-based model; the bias was also similar between the methods, ranging from 0.88 to 1.35 in the genomic-based model and from 0.96 to 1.41 in the pedigree-based model. The individual accuracies of breeding values were evidently increased in the genomic evaluation, with values ranging from 0.41 to 0.56 in the genomic-based model and from 0.26 to 0.54 in the pedigree-based model. Even based on a small number of genotyped animals and a small database for some traits, the results suggest that ssGBLUP is feasible and may be applied to national genetic evaluation of the breed to increase the accuracy of breeding values without greatly impacting predictive ability and bias.

Estimation of genetic parameters and inbreeding depression in Piau pig breed.

This study is aimed at estimating genetic parameters, effective population size, inbreeding, and inbreeding depression for birth weight, weaning weight, and average pre-weaning daily weight gain (ADG) in Piau pigs. We used information from 3841 Piau pigs, and four linear models were fitted in single-trait analyses, including or excluding maternal genetic effect, common litter effect, or a combination. The adjustments of the models were compared using the likelihood ratio test, in which the model that presented the best fit for each trait was used to estimate the (co)variance components. The inbreeding depression effect was evaluated using a linear model that included the fixed effects of sex, parity order, contemporary group, and inbreeding coefficient as a fixed covariate. The weights at birth and weaning showed low direct heritabilities (0.08 and 0.05, respectively), while the ADG showed moderate heritability (0.20). The weight at birth showed high genetic correlations with the weight at weaning (0.90) and the ADG (0.82). The weight at weaning and the ADG also showed a high genetic correlation (0.99). There was an inbreeding increase over the generations and a reduction in the effective population size. In the last generation evaluated, all the animals were inbred, the average inbreeding coefficient was 0.07, and the effective population size was 20.8. A significant inbreeding effect on ADG was observed, where an increase of 1% in the inbreeding coefficient resulted in a decrease of 0.005 g in the ADG. Thus, increasing effective population size is mandatory for controlling inbreeding and reducing the loss of variability in this Piau pig population.

The contribution of a MOET nucleus scheme for the improvement of Guzerá (Bos indicus) cattle for milk traits in Brazil.

The Guzerá breed evolved from the introduction of breeds from India, mainly the Kankrej breed, into Brazilian livestock at the end of the 19th century. Guzerá adapted well to the climatic conditions of Brazil, where it is considered a dual-purpose breed and has been used for pasture-based beef, milk or dual-purpose production systems with the use of low-medium inputs. The importance of this genetic resource for milk production in tropical regions moved breeders to implement the National Breeding Program for the Improvement of Guzerá in 1994, based on both progeny testing and MOET nucleus schemes. We sought to evaluate the role of the MOET nucleus scheme in the phenotypic and genetic progress for milk traits in this breed. The initial database used in the present study consisted of 6,513 cows, daughters of 761 bulls. We performed genetic evaluations with different datasets using a linear mixed model in a single trait analysis, including the relationship matrix, in order to estimate breeding values. Inbreeding coefficients were also calculated using the relationship of descent between two parents. Annual phenotypic, genetic and inbreeding trends were obtained for each dataset, considering the genetic pathways of both the bull and the cow. The low genetic progress found for milk yield in the whole population (5.27 ± 0.30 kg/year) partially accounted for the dual-purpose selection goal, despite the higher genetic progress in the MOET nucleus (9.39 ± 0.79 kg/year). The inbreeding coefficient was minimized at the beginning of the breeding program based on the use of new lineages. Posteriorly, it started increasing again from 0.002 in 1991 to 0.008 in 2019. The results provided evidence of the significant contribution of the MOET nucleus scheme for the phenotypic and genetic progress of Guzerá breed for milk traits, as well as of the impact of the breeding program on the inbreeding coefficient rate in the early years. New strategies need to be designed for the Guzerá breed, to allow for greater improvement of milk traits and minimizing the rate of the inbreeding coefficient.

Genomic prediction and genetic correlations estimated for milk production and fatty acid traits in Walloon Holstein cattle using random regression models.

The aims of this study were to: (1) estimate genetic correlation for milk production traits (milk, fat and protein yields and fat and protein contents) and fatty acids (FA: C16:0, C18:1 cis-9, LCFA, SFA, and UFA) over days in milk, (2) investigate the performance of genomic predictions using single-step GBLUP (ssGBLUP) based on random regression models (RRM), and (3) identify the optimal scaling and weighting factors to be used in the construction of the H matrix. A total of 302 684 test-day records of 63.875 first lactation Walloon Holstein cows were used. Positive genetic correlations were found between milk yield and fat and protein yield (rg from 0.46 to 0.85) and between fat yield and milk FA (rg from 0.17 to 0.47). On the other hand, negative correlations were estimated between fat and protein contents (rg from -0.22 to -0.59), between milk yield and milk FA (rg from -0.22 to -0.62), and between protein yield and milk FA (rg from -0.11 to -0.19). The selection for high fat content increases milk FA throughout lactation (rg from 0.61 to 0.98). The test-day ssGBLUP approach showed considerably higher prediction reliability than the parent average for all milk production and FA traits, even when no scaling and weighting factors were used in the H matrix. The highest validation reliabilities (r2 from 0.09 to 0.38) and less biased predictions (b1 from 0.76 to 0.92) were obtained using the optimal parameters (i.e., ω = 0.7 and α = 0.6) for the genomic evaluation of milk production traits. For milk FA, the optimal parameters were ω = 0.6 and α = 0.6. However, biased predictions were still observed (b1 from 0.32 to 0.81). The findings suggest that using ssGBLUP based on RRM is feasible for the genomic prediction of daily milk production and FA traits in Walloon Holstein dairy cattle.

Is single-step genomic REML with the algorithm for proven and young more computationally efficient when less generations of data are present?

Efficient computing techniques allow the estimation of variance components for virtually any traditional dataset. When genomic information is available, variance components can be estimated using genomic REML (GREML). If only a portion of the animals have genotypes, single-step GREML (ssGREML) is the method of choice. The genomic relationship matrix (G) used in both cases is dense, limiting computations depending on the number of genotyped animals. The algorithm for proven and young (APY) can be used to create a sparse inverse of G (GAPY~-1) with close to linear memory and computing requirements. In ssGREML, the inverse of the realized relationship matrix (H-1) also includes the inverse of the pedigree relationship matrix, which can be dense with a long pedigree, but sparser with short. The main purpose of this study was to investigate whether costs of ssGREML can be reduced using APY with truncated pedigree and phenotypes. We also investigated the impact of truncation on variance components estimation when different numbers of core animals are used in APY. Simulations included 150K animals from 10 generations, with selection. Phenotypes (h2 = 0.3) were available for all animals in generations 1-9. A total of 30K animals in generations 8 and 9, and 15K validation animals in generation 10 were genotyped for 52,890 SNP. Average information REML and ssGREML with G-1 and GAPY~-1 using 1K, 5K, 9K, and 14K core animals were compared. Variance components are impacted when the core group in APY represents the number of eigenvalues explaining a small fraction of the total variation in G. The most time-consuming operation was the inversion of G, with more than 50% of the total time. Next, numerical factorization consumed nearly 30% of the total computing time. On average, a 7% decrease in the computing time for ordering was observed by removing each generation of data. APY can be successfully applied to create the inverse of the genomic relationship matrix used in ssGREML for estimating variance components. To ensure reliable variance component estimation, it is important to use a core size that corresponds to the number of largest eigenvalues explaining around 98% of total variation in G. When APY is used, pedigrees can be truncated to increase the sparsity of H and slightly reduce computing time for ordering and symbolic factorization, with no impact on the estimates.

The estimation of variance components is computationally expensive under large-scale genetic evaluations due to several inversions of the coefficient matrix. Variance components are used as parameters for estimating breeding values in mixed model equations (MME). However, resulting breeding values are not Best Linear Unbiased Predictions (BLUP) unless the variance components approach the true parameters. The increasing availability of genomic data requires the development of new methods for improving the efficiency of variance component estimations. Therefore, this study aimed to reduce the costs of single-step genomic REML (ssGREML) with the Algorithm for Proven and Young (APY) for estimating variance components with truncated pedigree and phenotypes using simulated data. In addition, we investigated the influence of truncation on variance components and genetic parameter estimates. Under APY, the size of the core group influences the similarity of breeding values and their reliability compared to the full genomic matrix. In this study, we found that to ensure reliable variance component estimation, it is required to consider a core size that corresponds to the number of largest eigenvalues explaining around 98% of the total variation in G to avoid biased parameters. In terms of costs, the use of APY slightly decreased the time for ordering and symbolic factorization with no impact on estimations.

Influence of Genotype on Endometrial Angiogenesis during Early Pregnancy in Piau and Commercial Line Gilts.

This study aimed to evaluate the endometrial angiogenesis of pregnant commercial line and Piau gilts during early pregnancy. We used 27 gilts, divided into three groups according to the type of mating: Commercial (n = 9), commercial line females mated with commercial line males; Cross-mated (n = 9), Piau females mated with commercial line males; and Piau (n = 9), Piau females mated with Piau males. Each group was divided into three subgroups based on gestational age at the time of slaughter (7, 15, and 30 days of pregnancy). Immediately after slaughter, endometrial samples were obtained for histological evaluation and for analysis of the relative transcript abundance (RTA) of angiogenesis-related genes (HIF1α, FGF9, ANG1, TEK, VEGFA, ANGPT1, and ANGPT2). The number of endometrial glands was similar among groups but decreased with gestational age (p < 0.05). Piau females showed a higher number of blood vessels (p < 0.05) at 7 and 15 days of pregnancy, but no differences were observed among groups at 30 days, suggesting an influence of the male genotype on the pattern of uterine vascularization. There were no differences among groups for RTA of the FGF9, HIF1α, TEK, VEGFA, ANGPT1, and ANGPT2 genes. The HIF1α-gene RTA was higher at 7 and 15 days of pregnancy; for TEK and ANGPT1, the RTA was higher at 15 days of pregnancy; and the RTA of VEGFA and ANGPT2 genes were higher at 30 days of pregnancy. The ANG1 RTA was similar for pregnancies in the commercial and Piau groups but was higher (p < 0.05) at 15 days in the Cross-mated group, suggesting an interaction between genotypes. Overall, the pattern found for the RTA of angiogenesis-related genes was similar among the groups in this study, although some phenotypic differences could be noted, such as the highest number of blood vessels being found during early pregnancy of Piau gilts. The results of the gene RTA when crossed with phenotypic data led to conclusions that are conflicting with those reported in the literature. However, noteworthy is that angiogenesis is a complex process in which the balance between stimulatory and inhibitory factors may be related to time.

Random regression test-day models to describe milk production and fatty acid traits in first lactation Walloon Holstein cows.

We investigated the use of different Legendre polynomial orders to estimate genetic parameters for milk production and fatty acid (FA) traits in the first lactation Walloon Holstein cows. The data set comprised 302,684 test-day records of milk yield, fat and protein contents, and FAs generated by mid-infrared (MIR) spectroscopy, C16:0 (palmitic acid), C18:1 cis-9 (oleic acid), LCFAs (long-chain FAs), SFAs (saturated FAs) and UFAs (unsaturated FAs) were studied. The models included random regression coefficients for herd-year of calving (h), additive genetic (a) and permanent environment (p) effects. The selection of the best random regression model (RRM) was based on the deviance information criterion (DIC), and genetic parameters were estimated via a Bayesian approach. For all analysed random effects, DIC values decreased as the order of the Legendre polynomials increased. Best-fit models had fifth-order (degree 4) for the p effect and ranged from second- to fifth-order (degree 1-4) for the a and h effects (LEGhap: LEG555 for milk yield and protein content; LEG335 for fat content and SFA; LEG545 for C16:0 and UFA; and LEG535 for C18:1 cis-9 and LCFA). Based on the best-fit models, an effect of overcorrection was observed in early lactation (5-35 days in milk [DIM]). On the contrary, third-order (LEG333; degree 2) models showed flat residual trajectories throughout lactation. In general, the estimates of genetic variance tended to increase over DIM, for all traits. Heritabilities for milk production traits ranged from 0.11 to 0.58. Milk FA heritabilities ranged from low-to-high magnitude (0.03-0.56). High Spearman correlations (>0.90 for all bulls and >0.97 for top 100) were found among breeding values for 155 and 305 DIM between the best RRM and LEG333 model. Therefore, third-order Legendre polynomials seem to be most parsimonious and sufficient to describe milk production and FA traits in Walloon Holstein cows.

Genetic study of quantitative traits supports the use of Guzerá as dual-purpose cattle.

OBJECTIVE: The aim of this study was to estimate genetic parameters for 305-day cumulative milk yield and components, growth, and reproductive traits in Guzerá cattle. METHODS: The evaluated traits were 305-day first-lactation cumulative yields (kg) of milk (MY305), fat (FY305), protein (PY305), lactose (LY305), and total solids (SY305); age at first calving (AFC) in days; adjusted scrotal perimeter (cm) at the ages of 365 (SP365) and 450 (SP450) days; and adjusted body weight (kg) at the ages of 210 (W210), 365 (W365), and 450 (W450) days. The (co)variance components were estimated using the restricted maximum likelihood method for single-trait, bi-trait and tri-trait analyses. Contemporary groups and additive genetic effects were included in the general mixed model. Maternal genetic and permanent environmental effects were also included for W210. RESULTS: The direct heritability estimates ranged from 0.16 (W210) to 0.32 (MY305). The maternal heritability estimate for W210 was 0.03. Genetic correlation estimates among milk production traits and growth traits ranged from 0.92 to 0.99 and from 0.92 to 0.99, respectively. For milk production and growth traits, the genetic correlations ranged from 0.33 to 0.56. The genetic correlations among AFC and all other traits were negative (-0.43 to -0.27). Scrotal perimeter traits and body weights showed genetic correlations ranging from 0.41 to 0.46, and scrotal perimeter and milk production traits showed genetic correlations ranging from 0.11 to 0.30. The phenotypic correlations were similar in direction (same sign) and lower than the corresponding genetic correlations. CONCLUSION: These results suggest the viability and potential of joint selection for dairy and beef traits in Guzerá cattle, taking into account reproductive traits.

Searching for causal relationships among latent variables concerning performance, carcass, and meat quality traits in broilers.

In causal relationship studies, the latent variables may summarize the phenotypes in theoretical traits according to their phenotypic correlations, improving the understanding of causal relationships between broilers phenotypes. In this study, we aimed to investigate potential causal relationships among latent variables in broilers using a structural equation model in the context of genetic analysis. The data used in this study comprised 14 traits in broilers with 2,017 records each, and 104,154 animals in pedigree. Four latent variables (WEIGHT, LOSSES, COLOUR, and VISCERA) were defined and validated using Bayesian Confirmatory Factor Analysis. Subsequently, a search for causal linkage structures was performed, obtaining a single causal link structure between the latent variables. Then, this information was used to fit the structural equation model (SEM). The results from the SEM indicated positive causal effects of the variables WEIGHT and LOSSES on the variables VISCERA and COLOUR, respectively, with structural coefficient estimates of 1.006 and 0.040, respectively. On the other hand, an antagonist causal effect of the variable WEIGHT on the variable LOSSES was verified, with a structural coefficient estimate of -4.333. These results highlight the causal relationship between performance and meat quality traits, which may be associated with the natural processes involved in the conversion of muscle into meat and the structural changes in muscle tissues due to intense selection for high growth rates in broilers.

Autoregressive single-step model for genomic evaluation of longitudinal reproductive traits in portuguese holstein cattle.

We investigated the applicability of ssGBLUP methodology under the autoregressive model (H-AR) for genomic evaluation of longitudinal reproductive traits in Portuguese Holstein cattle. The genotype data of 1,230 bulls and 1,645 cows were considered in our study. The reproductive traits evaluated were interval from calving to first service (ICF), calving interval (CI) and daughter pregnancy rate (DPR) measured during the first four parities. Reliability and rank correlation were used to compare the H-AR with the traditional pedigree-based autoregressive models (A-AR). In addition, a validation study was performed considering different scenarios. Higher genomic estimated breeding values (GEBV) reliabilities were obtained for genotyped bulls when evaluated under the H-AR model, with emphasis on bulls with less than 9 daughters. For this group, the averages of GEBV reliabilities corresponded to 0.62, 0.69 and 0.62 for ICF, CI and DPR, respectively, while the averages obtained by the A-AR model were 0.27, 0.15 and 0.16. The validation study was favourable to H-AR. The best results were observed in the scenario where genotyped cows were combined with contributing bulls (genotyped bulls with daughter or relationship information in the population). Overall, the results suggest that ssGBLUP methodology under the autoregressive model is a feasible and applicable approach to be used in genomic analyses of longitudinal reproductive traits in Portuguese Holstein cattle.

Autoregressive model for genetic evaluation of longitudinal reproductive traits in Brazilian Holstein cattle.

Reproductive efficiency is major determinant of the dairy herd profitability. Thus, reproductive traits have been widely used as selection objectives in the current dairy cattle breeding programs. We aimed to evaluate strategies to model days open (DO), calving interval (CI) and daughter pregnancy rate (DPR) in Brazilian Holstein cattle. These reproductive traits were analysed by the autoregressive (AR) model and compared with classical repeatability (REP) model using 127,280, 173,092 and 127,280 phenotypic records, respectively. The first three calving orders of cows from 1,469 Holstein herds were used here. The AR model reported lower values for Akaike Information Criteria and Mean Square Errors, as well as larger model probabilities, for all evaluated traits. Similarly, larger additive genetic and lower residual variances were estimated from AR model. Heritability and repeatability estimates were similar for both models. Heritabilities for DO, CI and DPR were 0.04, 0.07 and 0.04; and 0.05, 0.06 and 0.04 for AR and REP models, respectively. Individual EBV reliabilities estimated from AR for DO, CI and DPR were, in average, 0.29, 0.30 and 0.29 units higher than those obtained from REP model. Rank correlation between EBVs obtained from AR and REP models considering the top 10 bulls ranged from 0.72 to 0.76; and increased from 0.98 to 0.99 for the top 100 bulls. The percentage of coincidence between selected bulls from both methods increased over the number of bulls included in the top groups. Overall, the results of model-fitting criteria, genetic parameters estimates and EBV predictions were favourable to the AR model, indicating that it may be applied for genetic evaluation of longitudinal reproductive traits in Brazilian Holstein cattle.

GWAS and gene networks for milk-related traits from test-day multiple lactations in Portuguese Holstein cattle.

This study focused on the identification of QTL regions, candidate genes, and network related genes based on the first 3 lactations (LAC3) of milk, fat, and protein yields, and somatic cell score (SCS) in Portuguese Holstein cattle. Additionally, the results were compared with those from only first lactation (LAC1) data. The analyses were performed using the weighted single-step GWAS under an autoregressive test-day (TD) multiple lactations model. A total of 11,434,294 and 4,725,673 TD records from LAC3 and LAC1, respectively, including 38,323 autosomal SNPs and 1338 genotyped animals were used in GWAS analyses. A total of 51 (milk), 5 (fat), 24 (protein), and 4 (SCS) genes were associated to previously annotated relevant QTL regions for LAC3. The CACNA2D1 at BTA4 explained the highest proportion of genetic variance respectively for milk, fat, and protein yields. For SCS, the TRNAG-CCC at BTA14, MAPK10, and PTPN3 genes, both at BTA6 were considered important candidate genes. The accessed network refined the importance of the reported genes. CACNA2D1 regulates calcium density and activation/inactivation kinetics of calcium transport in the mammary gland; whereas TRNAG-CCC, MAPK10, and PTPN3 are directly involved with inflammatory processes widely derived from mastitis. In conclusion, potential candidate genes (TRNAG-CCC, MAPK10, and PTPN3) associated with somatic cell were highlighted, which further validation studies are needed to clarify its mechanism action in response to mastitis. Moreover, most of the candidate genes identified were present in both (LAC3 and LAC1) for milk, fat and protein yields, except for SCS, in which no candidate genes were shared between LAC3 and LAC1. The larger phenotypic information provided by LAC3 dataset was more effective to identify relevant genes, providing a better understanding of the genetic architecture of these traits over all lactations simultaneously.

Genetic parameters for milk, growth, and reproductive traits in Guzerá cattle under tropical conditions.

This study aimed to estimate the genetic parameters of milk (305-day milk yield (MY305)), growth (weaning weight (WW), yearling weight (YW), and weight at 550 days (W550)), and reproductive (age at first calving (AFC)) traits in Guzerá cattle by using Bayesian multiple-trait models. Systematic effects included sex and age at calving for the growth and milk traits, respectively. The additive genetic and contemporary groups (herd and year and season of birth) were included as random effects. Additionally, maternal genetic and permanent effects were also included as random effects for the WW. The heritability estimates were 0.29 (MY305), 0.42 (WW), 0.49 (YW), 0.56 (W550), and 0.25 (AFC). The genetic correlations among the growth traits were higher than 0.83; between the MY305 and WW, MY305 and YW, and MY305 and W550, the genetic correlations were 0.25, 0.32, and 0.36, respectively. The AFC was negatively correlated with the milk and growth traits. These results suggest the viability and potential of the joint selection for milk, beef, and reproductive traits in Guzerá cattle.

Genetic parameters for fertility traits in Nellore bulls.

Nellore is the main cattle breed used in Brazil, being the largest commercial herd in the world. Beyond the importance of male reproductive efficiency for farm profit, the use of reproductive techniques, mainly artificial insemination, turns the evaluation of male reproductive traits even more important. Estimation of genetic parameters increases the knowledge on traits variances and allows envisaging the possibility of the inclusion of new traits as selection criterion. Genetic parameters for fifteen traits that can be classified as testicular biometry or physical and morphological semen traits were estimated for a Nellore bull population ranging from 18 to 36 months. Single-trait and bi-trait animal models were used for (co)variance components estimation. The contemporary group was considered as fixed effect and age at measurement as covariable. Scrotal circumference presented heritability of 0.47 ± 0.12. This value is similar to the heritabilities found for all testicular biometry traits (0.34-0.48). Sperm progressive motility, which has a direct effect on bull fertility, presented low heritability (0.07 ± 0.08). Major and total sperm defects presented moderate to high heritabilities (0.49 ± 0.18 and 0.39 ± 0.15, respectively), indicating that great genetic gain can be obtained through selection against sperm defects. High and positive genetic correlations were observed among testicular biometry traits, which also presented favourable genetic correlations with physical and morphological traits of the semen with magnitude ranging from high to low. Scrotal circumference presented moderate to high and favourable genetic correlations with sperm progressive motility, sperm turbulence, major sperm defects and total sperm defects. Thus, the selection for scrotal circumference results in favourable correlated genetic response for semen quality. The results show that the use of scrotal circumference as reference trait for bull fertility is appropriate, since it presents high heritability and favourable genetic correlation with semen quality.

Applying the Metafounders Approach for Genomic Evaluation in a Multibreed Beef Cattle Population.

Pedigree information is incomplete by nature and commonly not well-established because many of the genetic ties are not known a priori or can be wrong. The genomic era brought new opportunities to assess relationships between individuals. However, when pedigree and genomic information are used simultaneously, which is the case of single-step genomic BLUP (ssGBLUP), defining the genetic base is still a challenge. One alternative to overcome this challenge is to use metafounders, which are pseudo-individuals that describe the genetic relationship between the base population individuals. The purpose of this study was to evaluate the impact of metafounders on the estimation of breeding values for tick resistance under ssGBLUP for a multibreed population composed by Hereford, Braford, and Zebu animals. Three different scenarios were studied: pedigree-based model (BLUP), ssGBLUP, and ssGBLUP with metafounders (ssGBLUPm). In ssGBLUPm, a total of four different metafounders based on breed of origin (i.e., Hereford, Braford, Zebu, and unknown) were included for the animals with missing parents. The relationship coefficient between metafounders was in average 0.54 (ranging from 0.34 to 0.96) suggesting an overlap between ancestor populations. The estimates of metafounder relationships indicate that Hereford and Zebu breeds have a possible common ancestral relationship. Inbreeding coefficients calculated following the metafounder approach had less negative values, suggesting that ancestral populations were large enough and that gametes inherited from the historical population were not identical. Variance components were estimated based on ssGBLUPm, ssGBLUP, and BLUP, but the values from ssGBLUPm were scaled to provide a fair comparison with estimates from the other two models. In general, additive, residual, and phenotypic variance components in the Hereford population were smaller than in Braford across different models. The addition of genomic information increased heritability for Hereford, possibly because of improved genetic relationships. As expected, genomic models had greater predictive ability, with an additional gain for ssGBLUPm over ssGBLUP. The increase in predictive ability was greater for Herefords. Our results show the potential of using metafounders to increase accuracy of GEBV, and therefore, the rate of genetic gain in beef cattle populations with partial levels of missing pedigree information.

Autoregressive and random regression test-day models for multiple lactations in genetic evaluation of Brazilian Holstein cattle.

Autoregressive (AR) and random regression (RR) models were fitted to test-day records from the first three lactations of Brazilian Holstein cattle with the objective of comparing their efficiency for national genetic evaluations. The data comprised 4,142,740 records of milk yield (MY) and somatic cell score (SCS) from 274,335 cows belonging to 2,322 herds. Although heritabilities were similar between models and traits, additive genetic variance estimates using AR were 7.0 (MY) and 22.2% (SCS) higher than those obtained from RR model. On the other hand, residual variances were lower in both traits when estimated through AR model. The rank correlation between EBV obtained from AR and RR models was 0.96 and 0.94 (MY) and 0.97 and 0.95 (SCS), respectively, for bulls (with 10 or more daughters) and cows. Estimated annual genetic gains for bulls (cows) obtained using AR were 46.11 (49.50) kg for MY and -0.019 (-0.025) score for SCS; whereas using RR these values were 47.70 (55.56) kg and -0.022 (-0.028) score. Akaike information criterion was lower for AR in both traits. Although AR model is more parsimonious, RR model assumes genetic correlations different from the unity within and across lactations. Thus, when these correlations are relatively high, these models tend to yield to similar predictions; otherwise, they will differ more and RR model would be theoretically sounder.

Genes expression and phenotypic differences in corpus luteum and cumulus cells of commercial line and piau breed gilts.

We aimed to characterize the expression of angiogenesis-related genes in corpus luteum (CL) and cumulus cells (CC) during estrous cycle in gilts of different genetic groups, as well as to study the relation between gene expression and phenotypic data. Forty five gilts were used as follows: L1, Commercial Line 1 (Large White x Landrace x Duroc) (n = 15); L2, Commercial Line 2 (Large White x Landrace x Pietrain) (n = 15); and Piau, Piau breed gilts (n = 15). Estrus observation started from 120 days of age. After the second observed estrus females were slaughtered (n = 3) on days 3, 5, 10, 14 and 18 of estrous cycle (first day of estrous cycle as Day 0). CL sampling was performed on days 3, 5, 10 and 14 and collection of CC and follicular fluid on days 14 and 18. Follicular fluid was used for analysis of estradiol levels and CC and CL samples for analysis of angiogenesis-related genes expression, ANGPT-1/-2 and TEK in CC and MMP-2, VEGFA, VEGFR-1/-2, ANGPT-1/-2 and TEK in CL. Piau gilts showed lower ovulation rate than both L1 and L2 gilts (P < 0.05), lower number of large antral follicles (>6 mm) at 18 days than L2 gilts (P < 0.05), and smaller diameter of the largest follicles at 14 days than L1 gilts (P < 0.05). Piau and L2 gilts showed higher estradiol levels in follicular fluid on day 18. Expression of ANGPT-1 and -2 genes in CC did not differ among genetic groups neither among days of the estrous cycle, but TEK gene expression was higher in L1 than L2 gilts on day 18. Expression of VEGFA, VEGFR-2 and MMP-2 genes in CL did not differ among genetic groups and days of cycle, but VEGFR-1 expression was higher in Piau than L2 gilts on days 10 and 14, and it was higher in L1 than L2 gilts on day 14. The ANGPT-1/-2 and TEK genes expression in CL were significantly higher in Piau than L1 gilts on day 10. The ANGPT-2/ANGPT-1 gene expression ratio in CL was higher in L1 than Piau and L2 gilts at 14 days, suggesting a shorter luteal phase for L1 gilts. Results indicated differences among genetic groups for the pattern of the angiogenesis-related genes expression in CL along estrous cycles, which may be reflected in phenotypic traits such as ovulation rate, estradiol levels in follicular fluid and number and diameter of antral follicles.